Repairs Appliance
Repair and Installation Domestic Appliances
Customer Advice
Repair Appliance customer Advice
Bosch Washing machine error codes and solution
Bosch washing machines Display Error codes and meaning
Bosch washing machines have a variety of error codes that indicate specific issues with the appliance. Here are some common error codes and their meanings:
E02 - Heating timeout. The machine is taking too long to heat up, possibly due to a faulty heater or thermistor.
E13 - Water level too high. This can be caused by a faulty water inlet valve or pressure switch.
E17 - Water supply issue. The machine is not getting enough water, potentially due to a blocked or kinked hose or a faulty water inlet valve.
E18 - Drainage issue. The machine is not draining properly, which could be caused by a blocked filter or drain hose, or a faulty drain pump.
E23 - Leak detected. There may be a leak in the machine, often detected by a float switch at the bottom of the appliance.
E24 - Drain pump fault. The drain pump is not working correctly.
E25 - Drum not turning. This can be due to a problem with the drive motor or belt.
E26 - AquaStop failure. There is an issue with the AquaStop system, which could indicate a leak or fault in the AquaStop hose.
E27 - Door lock fault. The door is not locking properly, which might be due to a defective door lock mechanism.
E29 - Water flow sensor fault. The flow sensor is not detecting water flow properly.
E31 - Communication error. There is a communication issue between the control module and other components.
Comments